Automatic Electronic Product Tester Connector Fatigue Testing
Equipment
Model: RS-6600A-5
Purpose:
The machine is used in the insertion and extraction force tests of
various kinds of connectors. Equipped with an automatic axopetal
device and the special fixture for all kinds of connectors, it can
ensure accurate insertion and extraction force results.
The machine adopts the Windows program, which is easy to operate
and can automatically store test data (such as load-stroke curve,
load life die-away curve and test results) and all test conditions.
The machine also adopts high-precision load cell measurement and
servo motor drive, which ensures accurate insertion and extraction
force results, making it an essential detecting instrument in the
development and research and quality inspection of connector
manufacturers and finished products manufacturers.
Test Items:
Connector whole line insertion and extraction test
Connector single port insertion and extraction test
Connector insertion and extraction duration test
Connector single pin and plastic retention test
Connector normal force test
Connector clip compression test
Connector dynamic impedance test
Various tensile and pressure test
Connector dynamic impedance test (optional)
Characteristics:
Full-automatic test method:
The tester only needs to input and store the test conditions of the
test piece of a certain batch and the machine will conduct the
compression and
tensile tests automatically;
Widespread application:
With different fixtures, it can be used in various connector tests,
such as the tensile and compression tests and the endurance and
dynamic
impedance tests of R&D and IQC finished connectors. After the
test, it can automatically store the test curves and data;
High precision:
The load resolution can reach up to 0.01gf and the stroke
resolution, 0.001mm.
Unit switchover:
The units of load such as N, gf, kgf and Lb can be switched freely,
so can those of stroke such as mm and cm.
Language switchover:
English, traditional Chinese and simplified Chinese are available,
which shows good applicability.
Large memory space:
The test data (curves and data) can be stored in the computer hard
disc (the data for every test can be stored in it, without no
limitation on the
times).
People-oriented design and user-friendly operation:
All test conditions are set on the computer picture: test load,
stroke, times, speed, waiting time…
People-oriented report design:
The head of the report can be modified (both in English and
Chinese) at any time. The report can be generated automatically.
The machine
can print data and curve reports without your inputting them again.
Automatic test results judging and analysis:
You may input the upper and lower limit specification values of the
compression or tensile load, and the machine can automatically
judge
whether the test results pass or fail and analyze the results.
Roll curve display:
It can automatically generate tensile and compression curves. The
insertion is positive value, while the extraction, negative value.
Specification:
| Model | RS-6600A5 |
| Capacity | 50kgf |
| Unit(Switchable) | kgf, N, Lb, gf |
| Load accuracy | ±0.2% |
| Load least display | 0.01kgf or 0.01gf |
| Test stroke | 0~150mm |
| Stroke least display | 0.001mm |
| Effective width | 410mm |
| Test speed | 0~ 600mm/min |
| Speed accuracy | ±0.5% |
| Sample size(max) | W90xD45xH150mm |
| Connector lifetime tests | 5set |
| Test cycles | 1~999,999 |
| Motor | AC servo motor |
| Main Unit Dimension | W580xD370xH1140mm |
| Main Unit weight | 92kg |
| Fixture weight | 22kg |
| Computer & monitor weight | 13kg |
| Power | AC100V 3A |
| Emergency stop time | 100ms |
The fixture for fatigue test for 5 connectors:
