Servo Control Electronic Product Tester for Inserting / Extracting
Test
Model: RS-6600A
Purpose:
Apply for the inserting and extracting test of all kinds of
connectors. Equip with automatic center system and special
connecting grips to make sure
to get accurate testing result.
Adopt windows displayer in English program, easy operating,
automatic memory ( torque & angle curve, torque life time curve,
test report ), also
can memorize all the test conditions.
Adopt high precision load cell and drive by servo motor, can get
accurate Inserting & extracting force testing data.
Application:
Connector sets inserting & extracting test
Connector single hole inserting & extracting test
Connector inserting & extracting life-time test
Connector single pin and plastic retention test
Connector normal force test
Connector spring compression test
Connector dynamic impedance test
All kinds of tension & compression test
Characteristics:
Full-automatic test method:
The tester only needs to input and store the test conditions of the
test piece of a certain batch and the machine will conduct the
compression and
tensile tests automatically;
Widespread application:
With different fixtures, it can be used in various connector tests,
such as the tensile and compression tests and the endurance and
dynamic
impedance tests of R&D and IQC finished connectors. After the
test, it can automatically store the test curves and data;
High precision:
The load resolution can reach up to 0.01gf and the stroke
resolution, 0.001mm.
Unit switchover:
The units of load such as N, gf, kgf and Lb can be switched freely,
so can those of stroke such as mm and cm.
Language switchover:
English, traditional Chinese and simplified Chinese are available,
which shows good applicability.
Large memory space:
The test data (curves and data) can be stored in the computer hard
disc (the data for every test can be stored in it, without no
limitation on the
times).
People-oriented design and user-friendly operation:
All test conditions are set on the computer picture: test load,
stroke, times, speed, waiting time…
People-oriented report design:
The head of the report can be modified (both in English and
Chinese) at any time. The report can be generated automatically.
The machine can
print data and curve reports without your inputting them again.
Automatic test results judging and analysis:
You may input the upper and lower limit specification values of the
compression or tensile load, and the machine can automatically
judge whether
the test results pass or fail and analyze the results.
Roll curve display:
It can automatically generate tensile and compression curves. The
insertion is positive value, while the extraction, negative value.
Specification:
| Model | RS-6600A |
| Capacity (optional) | 5kgf, 10kgf, 20kgf, 50kgf, 100kgf |
| Unit (switchable) | Kgf, N, Lb, gf |
| Load accuracy | ±0.5% |
| Min. load display | 0.01 kgf or 0.01gf |
| Test stroke | 0~150mm |
| Min. displacement display | 0.001mm |
| Effective width | 200mm, 400mm ( optional ) |
| Test speed | 0~200mm/min or 0~400mm/min |
| Speed accuracy | ±0.5% |
| Motor | AC servo motor |
| Main unit dimension (WxDxH) | 360x270x950mm |
| Main unit weight | 70kg |
| Power supply | AC220V 10A or specified by user |
3D design schematic diagram:
