Air Conditioner Compression Horizontal Carton Clamping Force Tester
Equipment ASTM Carton Clamping Force Test Machine
Model: S6440
Product Description:
Packaging Container Clamping Force Testing Machine is designed for
testing the deflections of product packages and test the protective
capacity of packagesduring suffering level pressure in the process
of transportation and storage, by this way, ,package manufactrurer
could improve the quality of product package according the test
result.
Application:
Air Conditioner carton clamping force testing machine mainly
applies to the detection of the bearing capacity of the product
package clamped by forklift clamps during the transport process,
and the evaluation of the protective capacity of product package to
the inner packaged goods through the simulation test.
Safety protection:
Overload protection, overvoltage protection & limited position
protection device.
Test standards:
Air conditioning carton clamping force test machine meet the
requirements of ASTM D6055-96 METHOD, ISTA Packaging Test EHP Cold,
LTP-2001 Clamping test,
GB/T 4857.4-2008 Basic Experiment of Packaging and Transporting
Packages,
ISTA (International Safety Transit Association) 1A Packaging
Performance of Independent Packaging Products That is No Heavier
Than 1501b (68kg),
ASTM Standard D 4169 Standard Operating Specification for Shipping
Containers and System Protection Performance test,
ASTM Standard D 6055 Standard Test Method for Compositional Load
and Mechanized Transport of Large-scale Shipping Containers or
Crates,
ASTM Standard D 6179 Standard Test Method for Compositional Load
and Rash Transport of Large-scale Shipping Containers or Crates,
ASTM Standard D 999, Standard Test Method for Shock Test of
Shipping Containers,
ASTM Standard D 5445 Geographical Symbols for Standard Operational
Actions in Cargo Transport.
Specification:
1. Weight of maximum test piece: 1000kg;
2. Clamping pressure: 400-3000 pounds, adjustable;
3. Force calibrator: force sensor and digital display calibrating
the clamping force, unit switchable between Kg, KN and Lb;
4. Force value accuracy: National Standard Class 1.6;
5. Clamping panel dimension: 1200 × 1200mm, thickness of no less
than 25mm;
6. Clamp plate requirements: it is guaranteed that the two clamp
plates maintain smooth without deformation under the maximum
pressure working
state, the two plates are parallel, while each plate and the floor
are vertical to each other;
7. Maximum clamping space: no less than W2000 × D1200 × H1200mm;
8. Minimum clamping space: no more than W630 × D1200 × H1200mm;
9. Baseboard width: no slower than 1800 × 1800mm
10. Clamping speed: 10～300mm/min, adjustable;
11. Lifting space: 0～1000mm, adjustable
12. Power supply: 380V/50Hz
13. Safety device: overload protection, overvoltage protection,
limit protection, instantaneous conquassation protection and sudden
power-off
protection;
14. Control: human-computer interface with touch screen is used for
the controller that controlled by PLC program with convenient
operation and
stable performance;
15. Drive mode: hydraulic drive;
16. Manual operating arm analogs forklift’s actual operation action
to control clamping, stretching, hoisting and lowering action,
control panel may
realize continuous and automatic action and single step repetition;
17. Both vertical and horizontal offsets between clamp plate and
test piece can be set, repeatedly continuous and periodical clamp
test can be
realized according to setup parameters, test period can be adjusted
from 1 to 99 at will;
18. Clamp duration can be set with control program from 0 to 600s
at will;
19. Control panel and clamp arm are required to be installed
separately for the equipment and the distance from control panel to
clamp arm shall
be more than 2 meters;
20. Baseplate shall parallel to assembling floor so as to install
the test piece.
Picture:
ASTM ISTA 6-AMAZON Air conditioners package carton horizontal
compression, Air conditioning clamping force testing machines
